Siemens 5WG1 372-5EY01 Manual page 48

8.2 Setting Time Period for Weekly Program P1 .. P9
A. Recurring annually
The time period of a weekly program P1 .. P9 is fixed by entering a commence-
ment and finishing date. The weekly program begins at 0.
ment date and ends at 24 00 on the finishing date.
Example: As opposed to the normally active program on Channel C2 from
8 April until 27 May, the individual priority program with index P1 is to beco-
me effective. In the fixed time period with priority sequence P1 .. P9, the whole
standard program (without priority sequence) is suppressed.
Select P
Confirm
Confirm
Prio select
Additional programming as described or with button v back into the auto-
matic program.
weekly program
weekly program
00 on the commence-
weekly program
weekly program
weekly program
weekly program
Channel 2
weekly program
weekly program
Date Start
weekly program
Date End
weekly program
Store
48
„Standard"
Priority times
switching
P1-P9
„Priority 1"
„Priority 2"
„Priority 3"
„Priority 4"
„Priority 5"
„Priority 6"
„Priority 7"
„Priority 8"
„Priority 9"
Date
Permanently
ON/OFF
times
RELAY
ON
OFF