Operation; Applications; Filling Oiltank With Bar And Chain Lubricant - EGO Power+ CS1800 Operator's Manual

OPERATION

WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Z87.1. Failure to do so could result in objects being thrown into your eyes and other
possible serious injuries.
WARNING:
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts such
as screws, nuts, bolts, etc. Securely tighten all fasteners and caps and do not operate
this product until all missing or damaged parts are replaced.

APPLICATIONS

You may use this product for basic felling, limbing, pruning, and woodcutting of lumber
and trees.

FILLING OILTANK WITH BAR AND CHAIN LUBRICANT

WARNING:
injury, always remove the battery pack from the tool before filling the tank with oil.
WARNING:
Oil may spill and cause a fire.
NOTICE:
The chain saw is not filled
with oil at the time of purchase. It is
essential to fill the tank with oil before
use. Operating the chain saw without
chain oil or when the oil level is below
the minimum mark (Fig. 9) will result in
damage to the chain saw. Chain life and
cutting capacity depend on optimum
lubrication. The chain is automatically
lubricated with chain oil during operation.
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
Do not allow familiarity with this product to make you careless.
Always wear eye protection that is marked to comply with ANSI
Do not use any attachments or accessories not recommended by the
To prevent accidental starting that could cause serious personal
Do not smoke or bring any fire or flame near the oil or the chain saw.
9
Oil Tank Cap
Minimum Oil Mark
23