EGO Power+ CS1800 Operator's Manual page 35

◾
When bucking on a slope, always
stand on the uphill side of the log
(Fig. 24).
◾
To maintain complete control when
cutting through, release the cutting
pressure near the end of the cut
without relaxing the grip on the
chain saw handles. Don't allow the
chain to contact the ground. After
completing the cut, wait for the saw
chain to stop before you move the
chain saw. Always stop the motor
before moving from tree to tree.
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
24
35