Service; Safety Instructions For Chain Saw - EGO Power+ CS1800 Operator's Manual

◾
Use power tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
◾
When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
◾
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contact
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
◾
Do not use a battery pack or tool that is damaged or modified. Damaged
or modified batteries may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
◾
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 265 °F (130°C) may cause explosion.
◾
Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specified in the instructions. Charging
improperly or at temperatures outside the specified range may damage the
battery and increase the risk of fire.

SERVICE

◾
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
◾
Never service damaged battery packs. Service of battery packs should only
be performed by the manufacturer or authorized service providers.

SAFETY INSTRUCTIONS FOR CHAIN SAW

◾
Keep all parts of the body away from the saw chain when the chain saw
is operating. Before you start the chain saw, make sure that the saw
chain is not contacting anything. A moment of inattention while operating
chain saws may cause entanglement of your clothing or body with the chain.
◾
Always hold the chain saw with your right hand on the rear handle and
your left hand on the front handle. Holding the chain saw with a reversed hand
configuration increases the risk of personal injury and should never be done.
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
9