Capri Export 50 Hz Power Options; Hot Tub Fill Up Procedure - Sundance Spas 880 Series Owner's Manual

880 EXPORT SERIES
7.3

Capri Export 50 Hz Power Options

Voltage
Frequency
Max. Current Draw
Wattage
Number of Wires
Standard 12,1 Amp (2,8 kW) configuration. The heater will not operate
*
while the jets pump is running.
Alternate 23,6 Amp (5,4 kW) configuration. The heater will operate
**
while the jets pump is running.
8.0

Hot Tub Fill Up Procedure

For best results, read each step in its entirety before proceeding with that
step.
1. Prepare The Hot Tub For Filling
• Clear all debris from the hot tub. (Although the hot tub shell has
been polished at the factory, you may want to treat it with a specially
formulated hot tub cleaner.) Consult your dealer for additional
information prior to filling hot tub.
• Remove filter lid (Section 9.3, page 23), then remove filter
cartridge from filter bucket as illustrated in Section 13.1.
2. Fill Hot Tub
• Place the end of your garden hose into the empty filter bucket.
CAUTION: TO DECREASE BUILD UP ON COMPONENTS AND
MINIMIZE ACRYLIC DAMAGE. Never fill with water from a water
softener. If your water is extremely "hard", it is preferable to fill half-
way with hard water and the rest of the way with softened water.
Water that is too soft can be corrosive to metal components.
Page 16
Export 50 Hz Capri
230V/12,1A
230 VAC
50 Hz
12,1 Amps*
2,8 kW
3
230V/23,6A
230 VAC
50 Hz
23,6 Amps**
5,4 kW
3