Tiger SIDE FLAIL ASEMBLIES JD 5065M Mounting And Operating Instructions page 111

REVERSING MOWER ROTATION OF SD REAR FLAIL MOWERS
Remove the shield guard and belt shield. Next, remove the Rosta stop and loosen the Rosta Tensioner
(CAUTION: the Rosta Tensioner is under belt pressure. Sudden release of this pressure may cause serious
injury). Remove the Rosta Tensioner and relocate to the Reverse Rotation Tensioner location. Using the
Rosta wrench, tention the belt, then tighten the Rosta bolt. Check the tension and adjust as needed. When
the correct tension is achieved install the Rosta stop and torque the bolts appropriately.
Rosta
Tensioner
Side and Rear Flail
©2011 Alamo Group Inc.
MAINTENANCE
Maintenance Section 4-21
Reverse Rotation
Tensioner location