Starting The Tractor - Tiger TWR-180 Operator's Manual

Rotary cutter
Hide thumbs Also See for TWR-180:
Table of Contents

Advertisement

4. STARTING THE TRACTOR

The operator must have a complete understanding of the placement, function, and operational use of all tractor
controls before starting the tractor. Review the tractor operator's manual and consult an authorized dealer for
tractor operation instructions if needed.
Essential Tractor Controls:
Locate the light control lever
Locate the engine shut off control
Locate the brake pedals and the clutch
Locate the PTO control
Locate the 3 point hitch control lever
Locate the hydraulic remote control levers
Before starting the tractor ensure the following:
Conduct all pre-start operation inspection and service according to the tractor operator's manual.
Make sure all guards, shields, and other safety devices are securely in place.
The parking brake is on.
The PTO control lever is disengaged.
The 3-point hitch control lever is in the lowered position.
The hydraulic remote control levers are in the neutral position.
The tractor transmission levers are in park or neutral.
Refer to the tractor owner's manual for tractor starting procedures. Only start the tractor while seated and
belted in the tractor operator's seat. Never bypass the ignition switch by short circuiting the starter solenoid.
After the tractor engine is running, avoid accidental contact with the tractor transmission to prevent sudden
and unexpected tractor movement.
DANGER!
Never run the Tractor engine in a closed building or without adequate ventilation. The
exhaust fumes can be hazardous to your health.
DANGER!
Start the Tractor only when properly seated in the Tractor seat. Starting a
Tractor in gear can result in injury or death. Read the Tractor operator's
manual for proper starting instructions.
TWR-180 / TWR-120 12/04
© 2004 Alamo Group Inc.
OPERATION
(SG-23)
(SG-13)
Operation Section 4-10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Twr-120

Table of Contents