Page 1
TURNTABLES READ THIS MANUAL VERY CAREFULLY NOT FOLLOWING THIS MANUAL WILL VOID YOUR WARRANTEE FAILURE TO MAIL IN YOUR WARRANTEE CARD WILL VOID YOUR WARRANTEE VPI INDUSTRIES INC., 77 CLIFFWOOD AVE #3B, CLIFFWOOD NJ 07721 PHONE: 732-583-6895, FAX: 732-946-8578 www.vpiindustries.com...
IT CANNOT BE STRESSED ENOUGH THAT A FLAT SURFACE WILL MAKE SETTING UP YOUR NEW ARIES A SNAP. THE STANDARD ARIES REQUIRES A SPACE OF 22” X 16” FOR ITS MAIN FRAME. THE ACTUAL FOOTPRINT OF THE ARIES LEGS MEASURES 19”...
Page 3
In this box you will find the main ARIES chassis. Remove all packaging, noting how it fits together. If you ever need to send the Aries back for service you must pack it properly. Save the packaging if you can, it will be very expensive to order it later.
Page 4
45 operation with the smaller section being 33 and the larger section being 45. The motor pulley of your ARIES is designed to let you slightly adjust the speed at 33 and 45. The center groove on the pulley in each diameter is the correct speed.
Page 5
VPI INDUSTRIES, INC. LIMITED WARRANTY OF THE ARIES TURNTABLE VPI Industries, Inc. (VPI) warrants this unit against defects in materials and/or workmanship for three (3) years from the date of purchase by the original retail purchaser. VPI’s sole obligation under this warranty is limited to the repair or replacement, at VPI’s option, of any part(s) found to be defective.
Need help?
Do you have a question about the ARIES and is the answer not in the manual?
Questions and answers