Addendum 2 - Wi-Fi Connection Properties And Firewall Rules - Smappee Infinity Installation Manual

Addendum 2 – Wi-Fi connection
properties and firewall rules
Wi-Fi Connection properties
• 2.4 GHz Wi-Fi required, preferably with automatic channel selection
• Networks without DHCP server are not supported
• WPA or WPA2 encryption mandatory
• Networks without security are not supported (!)
• SSID must be visible and should not be hidden during installation. SSID must NOT
contain the following characters: é,ç,è,ä,/\, ", à î ô ï
• Allowed special characters for the Wi-Fi password: #$%@?/ \
• MAC filtering must not be active on the router
• Your firewall should allow Smappee to create outbound secure HTTP connections
• The maximum number of characters for the WPA2/PSK is 20.
The DHCP of your router assigns the IP address of your Smappee.
Firewall rules
If you use a firewall, you should apply the following firewall rules to allow traffic from and
to the Smappee:
• Inbound rules: any IP - disabled, any port - disabled
• Outbound rules: any IP - allowed, any port - allowed
Smappee Infinity – Installation manual – English Page 28 of 29