Table of Contents
Advertisement
6.6.3 Deleting cards „above or below"
If a user loses his ID medium, it is usually impossible to delete the ID from the memory with
the procedure described in the previous chapter, since the medium is no longer available
(with an exception of entering the code at the keypad). Following procedure can be used
for deleting such ID. The procedure
before or right after the ID
Step 1
Read the programming card
for inserting: the reader goes
into
programming
which is indicated by slow
flashing of yellow LED.
Step
4 - A
For deleting an ID located
right before
the ID used in
precious
step,
read
programming
card
deleting.
requires using an ID
medium, which should be deleted.
Step 2
Read the programming card
for inserting 5 times in a row;
mode,
the
reader
Deleting cards "above or
below"
mode indicated by
fast flashing of yellow LED.
Step
4 - B
For deleting an ID located
right after
the
precious
step,
for
programming
inserting.
Pic.5 c): Deleting cards "above or below"
Page 17
medium, which was inserted
Step 3
Read
located
will
go
into
memory
after
delete. After this step the
module quickly flashes with
yellow LED.
Step 5
The reader module goes
the ID used in
back into
read
the
mode.
card
for
right
a
card,
which
is
in
the
module's
right before or right
the card you wish to
standard operating
Advertisement
Table of Contents
