TECHFASS MREM 82 MTM-MF User Manual page 16

6.6.1 Inserting cards into the reader's memory
Follow these steps for inserting cards into the reader module's memory:
Step 1
Read the programming card
for inserting: the reader goes
into programming mode.
6.6.2 Deleting cards from the reader's memory
For deleting the cards from the reader module's memory use following steps:
Step 1
Read the programming card
for deleting: the reader goes
into programming mode.
Step 2
One by one, read the cards
which are to be granted
access.
Pic.5 a): Inserting cards
Step 2
One by one, read the cards
which are to have their
access revoked.
Pic.5 b): Deleting cards
Page 16
Step 3
About 15 seconds
inserting the last card the
reader module goes back
into standard operating
mode.
Step 3
About 15 seconds
deleting the last card the
reader module goes back
into standard operating
mode.
after
after