Table of Contents
Advertisement
3-3.Exiting LSI Corp Config Utility
Follow these steps to exit LSI Corp Config Utility.
1.
If you changed any settings, you are prompted to save the changes before you exit.
At the prompt, select the item which you want, press <Enter> key.
2.
At "Adapter list" menu, press <ESC> key until a message prompts you to exit
At the prompt, select the item which you want, press <Enter> key.
Any changes made in SAS Configuration Utility will take effect the next time the server is
rebooted.
3-4.Using LSI Corp Config Utility
To select an option, use the arrow keys to move the cursor to the option, then press <->/<+> key.
In some cases, selecting an option displays another menu. You can return to the previous menu at
any time by pressing <Esc> key.
About details of an option, move the cursor to the option, and press <F1>/<Shift>+<1> key, help is
displayed.
"Adapter List" menu
It is a menu displayed first when "LSI Corp Config Utility" starts.
"Global Properties" menu
It is a menu displayed to push < Alt>+<N > key at "Adapter List" menu.
"Adapter Properties" menu
It is a menu displayed to push <Enter> key at "Adapter List" menu.
Advertisement
Table of Contents
