Table of Contents
Advertisement
2-3.Connecting a SAS device
To connect a SAS device.
1.
Confirm the power to the server is off (power lamp off), then unplug the power cord from the
electrical outlet.
2.
Insert a SAS cable connector in this product's connector fully for firm connection.
3.
Insert a cable connector (the other side) in SAS device's connector fully for firm connection.
4.
Plug the power cord of the server into the electrical outlet.
Do not connect this product to a server or SAS device that is not recommended by
NEC Corporation. If the product is connected to a server or SAS device that is not
recommended by NEC Corporation, the product may malfunction or fail.
Please contact the retailer or service center for the information on recommended
servers, SAS devices, or SAS cables.
If the power to the server is on (power lamp on), shut down the operating system
and then turn off the server.
Advertisement
Table of Contents
