Table of Contents
Advertisement
Connecting Your Precision I.D
Inside vehicle
Headphone
Socket
TV
If you do not have an Audio Out (RCA) on your receiver you can use
headphone socket on TV. Note: You will need to disconnect the headphone
socket once satellite has been found as TV will be muted.
Supplied
Not supplied
Ensure volume is turned up on receiver/TV and not muted
A. Single LNB
B. Twin LNB - Only available on models MXL019/65TWIN,
MXL019/55TWIN & MXL019/75TWIN.
Note: A twin LNB system can also be connected
to 2 receivers. Or 2 TV's with in-built sat tuners.
Signal Strength Meter on SKY™ box
To align the dish to Astra 2 using the SKY™ receiver, use the SIGNAL TEST menu built into the SKY™ digibox.
To access this menu:
Press the SERVICES button on the remote control. Enter SYSTEM SETUP (number 4).
Enter SIGNAL TEST (number 6). The display will then show, from top to bottom:
SIGNAL STRENGTH - SIGNAL QUALITY- LOCK INDICATOR - NETWORK ID - TRANSPORT STREAM.
You will need to adjust the dish until there is at least a quarter of the SIGNAL QUALITY bar display, the
LOCK INDICATOR shows OK and the NETWORK ID is displaying 0002. If the NETWORK ID is showing any other
details, you have locked onto the wrong satellite and will need to re-align the dish. Press BACK Up to exit
menu's.
10
Inline SAT
I.D Module
HDMI
TV OUT
Cable
Satellite Receiver
A: Optional Weatherproof Socket
RCA male
to male
LNB IN
AUDIO OUT
Single Output
Twin Output
Outside vehicle
A
'F'
Flylead
Precision I.D
Advertisement
Table of Contents
