Table of Contents
Advertisement
Using Your Integrated Sat Finder I.D
Your Sat Finder I.D is used to help you locate and find the
best signal quality received from satellites.
Using the integrated Sat Finder I.D
Make sure the TV/Sat Receiver is on, set to the correct satellite,
but showing no signal on your desired TV channel.
For best performance we recommend you set the
Receiver to one of the following channels:
Satellite
Channel Name
ASTRA1
SPORT 1
PROSEIBEN
ASTRA2
BBC 1 LONDON
SKY NEWS
1.
Turn the blue knob on the system fully anti-clockwise
and then slowly clockwise until 2-3 red LED's are lit.
2.
Set correct elevation, steadily search left to
right of South with the aid of the Sat Finder.
3.
As you rotate look for an increased number of LED's lit up (1).
4.
When you have aligned to the correct satellite set by the receiver
the Sat Finder lights light up (1) and the blue Sat Found LED (2) turns
on.
5.
Sat Found! Turn down the Sat Finder so only the green and blue
LED's are lit. You are now ready to enjoy your favourite TV
programs.
Fine tuning using the integrated Sat Finder I.D
Once a picture has been found, turn the sat finder down to a
deep tone and finely adjust your elevation and azimuth to
improve your signal and receive a higher tone with more lights lit.
Using the receiver Sat Finder
Firstly, ensure your built in sat finder is turned off by turning it
fully anti-clockwise so only the green light shows.
Turn your box onto the correct satellite (e.g. Astra 1 for Europe)
and bring up the satellite finder menu. (see receiver instructions).
Slowly rotate the dish from left to right until the signal quality
and intensity increases.
Fine tuning using the receiver Sat Finder
Once a picture has been found, bring up the satellite finder menu and finely adjust your elevation
and azimuth controls to improve your signal quality and intensity.
12
Channel Info
12480/V/27500
12541/H/22000
10773/H/22000
12207/V/27500
No Signal
1
2
TV
ASTRA 2 - UK TV
Advertisement
Table of Contents
