Table of Contents
Advertisement
Back
The only control on the back
of the unit is the power switch.
To turn on the Q-View Imager
Pro, push the power switch to
the "|" position. To turn off
the Q-View Imager Pro, push
the power switch to the "O"
position.
Tray Operation
The tray is opened by pressing
the tray button on the front
of the Q-View Imager Pro. The tray will not open if
Q-View Software is not running, the power is turned
off, or a plate is currently being imaged. Once the
button is pressed, the tray will extend to the point
where a plate can be placed on top of the glass and
within the glass cover. If there is something blocking
the tray's movement, the tray may reverse or stop.
The user must remove the blockage and repress the
button to resume the tray's movement.
Q-View Imager Pro
Note: The label
is placed on the
back panel and
contains the serial
number along with
power specifications
including voltage,
current, and
frequency.
12
Advertisement
Table of Contents
