Table of Contents
Advertisement
15
Chapter 3: Operation
BEFORE YOU BEGIN
The following procedure is recommended before
every use.
1. Wash the glass and glass cover within the
tray and ensure it is clean and free of debris.
2. Check within Q-View Software that the Q-View
Imager Pro is connected to the PC.
CLEANING THE TRAY
SURFACE
If any particulate, liquid, or dried salt residues or
smudges are left on the glass or the tray, it will
adversely affect the quality of the image and the
overall quality of your data. This can be cleaned with
70 percent ethanol using a lint-free cloth. Do not use
scouring cleaners or abrasive pads as this can scratch
the glass.
LOADING THE PLATE
When the user pushes the front button, the tray will
extend. Do not push or apply pressure on the tray
while it is in the opening or resting position. This will
adversely affect the performance of the tray as well
as the alignment with the lens and camera.
Quansys Biosciences
Advertisement
Table of Contents
