Chapter 2: System Overview; External Features; Back; Computer Connection - Quansys Q-View IMAGER LS Operator's Manual

Chapter 2: System
Overview
EXTERNAL
FEATURES

Back

There are three features on
the back of the Q-View Imager
LS. A power plug receptacle,
the USB cord
and a label containing the
serial number
specifications for the unit.

COMPUTER CONNECTION

The Q-View Imager LS is connected to the PC via a
USB cable. Do not unplug either end of the USB cable
without closing Q-View Software on the PC. From
within Q-View Software, the user can open Imager
Management and see an entry in a table for the
Q-View Imager LS with one of the columns saying
"connected" or "disconnected."
Q-VIEW SOFTWARE
INTRODUCTION
A copy of Q-View Software will accompany the
Q-View Imager LS. To download and install Q-View
Software from online, you must request a license key
from customer support (sales@quansysbio.com). You
may also request a copy of Q-View Software from:
quansysbio.com/request-software.
Please contact our technical support staff at support@
quansysbio.com for more assistance with Q-View
Software.
For Research Use Only
receptacle,
and power
Note: The label
is placed on the
back panel and
contains the serial
number along with
power specifications
including voltage,
current, and
frequency.
9