Chemical Safety - Quansys Q-View Imager Pro Operator's Manual

10. Take the cables and bundle and tie them
together
11. Insert the Q-View Imager Pro into the foam
insert and then into the Q-View Imager Pro
box
12. Place the glass cover, glass, and cords into
the box
13. If disposal of the Q-View Imager Pro is needed
contact Quansys Biosciences for assistance.

CHEMICAL SAFETY

The only chemicals used with the Q-View Imager Pro
are deposited within the wells of the plate, which is
placed on the tray. It is important to take precaution
that these chemicals do not spill onto the tray. If any
spillage occurs while the tray is open, clean the tray
immediately before closing it. If the tray is closed
with liquids present on the tray, glass, or glass cover,
they may drip onto the camera lens and damage the
Q-View Imager Pro.
Q-View Imager Pro
8