Table of Contents
Advertisement
Step 6: Run the Setup Utility
Overview
The BIOS (Basic Input/Output System) Setup Utility allows you to configure the operations of
the EPC-3221 and optional Rear Transition I/O Module.
Access
To access the Setup Utility, press F2 when prompted during the Power-On Self Test (POST).
Main Menu
The Setup Utility display
• Options: The options for the current menu are on the left side of the screen
• Item-Specific Help: Instructions for the current item are on the right side
Menus
The Setup Utility contains a toolbar at the top of the screen that allows you to access the
following menus:
• Main
• Advanced
• Security
• Power
• Boot
• Server
• Exit
Options and items for these menus are listed in the tables beginning on
Boot and Exit
The Boot and Exit menus do not have "default" values. Items for these menus are not included
in the tables below.
Operation
Use the following keys to operate the Setup Utility:
Up Arrow (
Left Arrow (
Plus (+) and Minus (–)
Service Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(Figure 9
on
page
Key
↑
↓
) and Down Arrow (
)
Select a menu item
) and Right Arrow (
←
→
)
Select a menu
Change the value of an item
Enter
Access a sub-menu or pop-up menu
F1
Access Help for the Setup Utility
F9
Load default values for the setup options
F10
Save the changes you have made and exit the Setup Utility
Esc
Access the Exit menu
Chapter 2: 6 Steps to Operation
20) contains two areas:
Action
page
23.
21
Advertisement
Table of Contents
