Figure 7. Installing The Transition I/O Module - RadiSys EPC-3221 C1000BX-SVE Service Manual

Figure 7. Installing the Transition I/O Module

CompactPCI ®
Passive
Backplane
Card Guide Rails
(upper/lower)
Refer to the more detailed C1XTN02
installation instructions on page
Service Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Step 1:
Insert the C1XTN02
into the chassis
subrack.
Step 3:
Tighten the captive
fasteners on the
I/O panel (4 places).
Alignment Hole (upper/lower)
Subrack Rails
(upper/lower)
16.
Chapter 2: 6 Steps to Operation
Chassis Subrack
Captive Fasteners
(4 places)
Alignment Pins
(upper and lower)
Upper
Injector/Ejector
Lever
C1XTN02
Rear
Transition I/O
Module
Lower
Injector/Ejector
Lever
Step 2:
First lock the top injector/
ejector lever, then the lower
lever on the I/O panel.
17