Table of Contents
Advertisement
Optional Features
The EPC-3221 is available with the following optional on-board peripherals:
• C1XTN02 Rear Transition I/O Module
• PCI Bridge Card
SCSI
The SCSI option provides the following features and components:
Note: The EPC-3221 supports only single-ended (SE) SCSI devices.
• Adaptec AIC
• Active SCSI terminators
Video
The AGP Video option provides the following features and components:
• CHIPS 69000 HiQVideo™ Accelerator with 2 MB integrated SDRAM
• VGA video 15-pin female D-Sub connector on the I/O bracket
Ethernet
The Ethernet option provides the following features and components:
• Intel 82559 10/100 Mb/sec Ethernet LAN Controller
• RJ-45 10/100BaseT Ethernet connector on the I/O panel
• Ethernet activity LEDs on the I/O panel
Rear Transition I/O
The C1XTN02 Rear Transition I/O Module is also an optional component to expand
connectivity and functionality of the EPC-3221 SCB, for use as part of a cPCI computer
system. See
PCI Bridge Card
To drive an additional PCI bus and increase the number of PCI devices, the EPC-3221 can be
equipped with the optional CPBRI01 PCI-to-PCI Bridge Card.
Note: The EPC-3221 and the PCI Bridge Card each use the Intel 21150 PCI-to-PCI Bridge
and identical CompactPCI connectors for J1 and J2.
Service Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
-7890 PCI-to-Ultra SCSI Controller
®
C1XTN02 Rear Transition I/O Module on page 6.
Chapter 1: Introduction
3
Advertisement
Table of Contents
