Blow Function Setting - Seeley Braemar MBHVD1S Series Owner's Manual

OPERATION cont. OPERATION cont.

BLOW FUNCTION SETTING

BLOW FUNCTION SETTING
"BLOW" function forces the fan to "BLOW" function forces the fan to
continue operating after the unit is continue operating after the unit is
turned off, so that moisture on the turned off, so that moisture on the
indoor unit coil will be evaporated to indoor unit coil will be evaporated to
avoid mildew. avoid mildew.
To activate the "BLOW" Function in To activate the "BLOW" Function in
COOL or DRY mode, press the COOL or DRY mode, press the
"Function" button to select the "BLOW" "Function" button to select the "BLOW"
option. With the symbol "BLOW" option. With the symbol "BLOW"
flashing, press the "Enter/Cancel" flashing, press the "Enter/Cancel"
button to activate it. button to activate it.
To cancel the "BLOW" function, press To cancel the "BLOW" function, press
the "Function" button to select the the "Function" button to select the
Unit On, no BLOW function Unit On, no BLOW function
"BLOW" option and then pressing the
"Enter/Cancel" button. "Enter/Cancel" button.
Notes: Notes:
1. When the "BLOW" function is 1. When the "BLOW" function is
activated, if the unit is turned off the activated, if the unit is turned off the
indoor fan will still run at low fan speed indoor fan will still run at low fan speed
for another 2 minutes. When the for another 2 minutes. When the
"BLOW" function is deactivated, the "BLOW" function is deactivated, the
indoor fan will stop when the unit is indoor fan will stop when the unit is
turned off. turned off.
2. The "BLOW" function is not 2. The "BLOW" function is not
available in the FAN and HEAT modes. available in the FAN and HEAT modes.
"BLOW" function setting is as shown "BLOW" function setting is as shown
below. below.
Press "Function" button to Press "Function" button to
select BLOW select BLOW
Press "Enter/Cancel" Press "Enter/Cancel"
button to cancel BLOW button to cancel BLOW
SEELEY INTERNATIONAL - OWNER'S MANUAL
SEELEY INTERNATIONAL – OWNER'S MANUAL
"BLOW" option and then pressing the
Press "Enter/Cancel" Press "Enter/Cancel"
button to activate BLOW button to activate BLOW
Press "Function" button to Press "Function" button to
select BLOW select BLOW
11
11