Clock Function Setting; Quiet Function Setting; Lock Function; Filter Setting - Seeley Braemar SDHV 3Phase Series Owner's Manual

OPERATION cont.
Clock Setting:
Press the timer/clock button
setting status.
The hour position of the clock will flash, press
value. After setting the hour value, press left button
to switch to the minute position setting, the minute position will flash, press
and to adjust the minute value.
After setting the clock, press
exit clock setting state.
Quiet Operation:
Under COOL, HEAT, FAN modes press the
"Quiet" mode, this will reduce the fan to low speed.
NOTE: Under AUTO, DRY mode, the fan speed is AUTO and the
button does not work.

Lock Function:

Press the temperature buttons
control will enter a locked state and the icon
To exit Lock mode, repeat above action and the
the buttons will function as per normal.
Air Filter Reminding Function:
The wired wall control records the total running time of the indoor unit, when the
accumulated running time reaches the pre-set value, the air filter cleaning
reminder icon
After cleaning the filter, press
the clean filter icon will not be displayed.
for 3 seconds, and then enter into the clock
and
will be displayed.
and
button or wait 5 seconds to confirm and
button to set the unit into
simultaneously, and the wired
will be displayed.
will not be displayed and
for 3 seconds to reset the filter timer and
SEELEY INTERNATIONAL – OWNER'S MANUAL
to adjust the hour
or right button
7