Advertisement
slowly in this manner for an additional 5 minutes. Next, with the cold water faucet
still running, gradually move your bypass valve to the fully open position.
NOTE: You may see some initial discoloration from the softened water – this
is normal and should dissipate within the first 40-50 gallons of water used.
• Turn off the nearby cold water faucet when the water runs clear.
• Add approximately five gallons of water to your brine tank, and add 120-160
pounds of pellet, solar, or block salt or potassium chloride to your brine tank.
Enjoy Your Softener!
Congratulations, you have successfully installed your new water softener with Fleck
9100SXT Meter Valve!
Please maintain your system by keeping the softener plugged-in and always keep your
brine tank filled with salt to at least above the water level.
We appreciate your business, and hope that you enjoy years of trouble-free softened
water!
© 1999-2007 QualityWaterForLess.com
- QualityWaterForLess.com
- 17 -
info@qualitywaterforless.com
Advertisement
