Tenda A18 User Manual page 9

1.3.2 Ports & Buttons
RESET
button
WPS button

Press the WPS button down for 1 second to perform WPS negotiation, the WPS LED
indicator blinks, and enable the WPS function of another device within 2 minutes to
establish a WPS connection.
RESET button

With the PWR LED indicator solid on, hold the RESET button down using a paper clip, and
release it when all the LED indicators blink once then turn off. Wait until the PWR LED
indicator lights solid on again, the repeater is reset successfully.
LAN port

In Repeater mode, this port allows a wired device, such as a desktop computer, to be
−
connected to the repeater to access the internet.
In AP mode, it is used to connect to your upstream device such as a wired router,
−
enabling the repeater access the internet.
WPS button
LAN port
3