Tenda A18 User Manual page 51

A.2 Default parameter values
The following table lists the default parameter values of the repeater.
Parameter
Login address
Login password
Operating mode
IP address
Subnet mask
DHCP server status
SSID
WiFi password
A18&A15
re.tenda.cn/192.168.0.254
None
Repeater mode
192.168.0.254
After expanding the network of the WiFi router successfully, the
repeater obtains an IP address automatically from the DHCP server of
the upstream device.
255.255.255.0
After expanding the network of the WiFi router successfully, the
repeater obtains a subnet mask automatically from the DHCP server
of the upstream device.
Enabled
It depends on whether the DHCP server is enabled of the upstream
device. If the repeater expands the network of WiFi router
successfully, the DHCP server will be disabled. Otherwise, it will be
enabled.
Tenda_EXT
None
45