Switching The Repeater From Ap Mode To Repeater Mode - Tenda A18 User Manual

6.3 Switching the repeater from AP mode to
repeater mode
Configurations (except SSID and WiFi password you set) will be cleared when you switch from AP
mode to Repeater mode, and you need to configure your repeater again.
Configuration procedure:
Step 1 Choose Operating Mode to enter the configuration page.
Step 2 Click Repeater Mode.
Step 3 Click Switch Mode.
Step 4 Click OK on the page that appears.
Step 5 Wait until the progress bar is complete. Then reconfigure it to
coverage.
---End
34
extend your existing WiFi