Resetting The Repeater - Tenda A18 User Manual

7.3

Resetting the repeater

You are recommended to reset the repeater if you forget your login password, or you cannot
locate the problem that interrupts your repeater's WiFi network service.
Resetting the repeater clears all configurations. You need to configure the repeater again.
To reset the repeater, use either of the following methods:
Method 1:
With the PWR LED indicator solid on, hold the RESET button down using a paper clip, and release
it when all the LED indicators blink once then turn off. Wait until the PWR LED indicator lights solid
on again, the repeater is reset successfully.
Method 2:
Step 1 Log in to the web UI of the repeater, choose Administration.
Step 2 Click Reset.
Step 3 Click Reset on the popup window.
---End
Wait a moment until the progress bar is complete. You need to reconfigure the repeater.
39