Ricoh Aficio FT4027 Operating Instructions Manual page 96

IF YOU CANNOT MAKE COPIES AS YOU WANT
Copier's condition
Misfeeds occur frequently.
5
If you cannot correct the problem by taking the above actions, please contact
your service representative.
IF YOU CANNOT MAKE COPIES AS YOU
Problem
Copies appear dirty.
The reverse side of an
original image is copied.
Copies are too light.
The same copy area is
dirty whenever making
copies.
Copies are blank or
parts of the image are
not copied.
5
If you cannot correct the problem by taking the above actions, please contact
your service representative.
94
Is the paper properly set in the paper tray?
¯
Always load paper correctly.
Are there any pieces of misfed paper or other foreign
objects in the machine?
¯
Make sure that the paper path is completely clear
of paper and other material after a misfeed.
Cause
The original has a gray or colored
background.
The image density is too dark.
The platen cover, exposure glass,
or document feeder belt is
dirty.
The image density is too dark.
The original has a low contrast
image.
The image density is too light.
Damp or rough grain paper is
used.
The platen cover, exposure
glass, or document feeder belt
is dirty.
The original is not set correctly.
An improper paper size is
selected.
Action
Action
Adjust the image density.
See page 41.
Clean them.
See pages 144 and 145.
Adjust the image density.
See page 41.
Adjust the image density.
See page 41.
Use dry paper without rough
grain.
Clean them.
See pages 144 and 145.
Set originals correctly.
See page 31, 32, or 34.
Select the proper paper size.
WANT