Ricoh Aficio FT4027 Operating Instructions Manual page 69

5
The position of the margin to be erased is determined according to the selected
copy paper and reproduction ratio. Make sure to select copy paper suitable for
your original.
5
The width of the margin to be erased can be changed with the user tools.
page 129.
5
Regarding functions that cannot be used together with this function,
86.
1
Press the Erase key once to se-
lect the Erase Center, twice to
select the Erase Border, or three
times to select both of them.
2
Set your original on the exposure
glass or in the optional document
feeder.
34.
5
If you place a book original on the
exposure glass, the original must be
aligned to the rear left corner.
3
Press the Start key.
See page 31, 32, or
ERASING PARTS OF THE COPY IMAGE (Erase)
i10Key {
mm
See
see page
1
2
j
67