Ricoh Aficio FT4027 Operating Instructions Manual page 92

IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
IF YOUR COPIER DOES NOT OPERATE AS
Check the followings:
Copier's condition
Nothing happens when the
main switch is turned on.
is lit.
is blinking or lit.
is lit.
is lit.
Staples do not come out at all.
is lit.
90
Check the power cord. Is it properly plugged into the
outlet?
¯
Plug it in firmly.
Load paper. See page 95.
Add toner. See page 98.
Add staples.
If you use the 20-bin sorter stapler,
If you use the 10-bin sorter stapler,
Remove misfed paper.
After loading a new staple cartridge, staples might not
be ejected the first few times you try to use the stapler.
There are jammed staples in the stapler. Remove the
jammed staples.
If you use the 20-bin sorter stapler,
If you use the 10-bin sorter stapler,
A few sheets might not be stapled. To correct this, try
turning over the paper stack in the 250-sheet, 500-
sheet, or large capacity tray. If there is no improvement,
change to copy paper with less curl.
Your machine is in the Energy Saver or Auto Off
condition.
¯
Press any key except the Start key to return to the
ready condition.
YOU WANT
Action
see page 99.
see page 100.
See page 101.
see page 105.
see page 106.