Ricoh Aficio FT4027 Operating Instructions Manual page 152

REMARKS
20-bin Sorter Stapler (Option)
5
To avoid problems caused by curly copies, try turning over the paper stack in the
250-sheet, 500-sheet, or large capacity tray. If there is no improvement, change
to copy paper with less curl.
5
If you stack translucent paper in the proof tray (not in Sort or Stack mode), it is
recommended that the paper grain is oriented with the paper path.
10-bin Sorter Stapler (Option)
5
To avoid problems caused by curly copies, try turning over the paper stack in the
250-sheet, 500-sheet, or large capacity tray. If there is no improvement, change
to copy paper with less curl.
5
If you stack translucent paper or 52 g/m
Stack mode), we recommend that the paper grain be oriented with the paper
path.
5
If copies are curled in the Sort or Stack mode, cancel Sort or Stack mode. Stack
copies in the proof tray.
20-bin Sorter (Option)
5
To avoid problems caused by curly copies, try turning over the paper stack in the
250-sheet, 500-sheet, or large capacity tray. If there is no improvement, change
to copy paper with less curl.
5
Whenever an OHP transparency is delivered to the proof tray, it should be taken
out right away. (It is not necessary to do this when you use the OHP Slip Sheet
mode.)
5
If copies smaller than B5 fed lengthwise are not stacked well, arrange them after
taking them from the bins.
10-bin Sorter (Option)
5
To avoid problems caused by curly copies, try turning over the paper stack in the
250-sheet, 500-sheet, or large capacity tray. If there is no improvement, change
to copy paper with less curl.
5
Whenever an OHP transparency is delivered to the proof tray, it should be taken
out right away. (It is not necessary to do this when you use the OHP Slip Sheet
mode.)
5
If copies smaller than A4 fed lengthwise are not stacked well, arrange them after
taking them from the bins.
150
2 paper in the proof tray (not in Sort or