Ricoh Aficio FT4027 Operating Instructions Manual page 141

SERVICE REPRESENTATIVE SETTING
SERVICE REPRESENTATIVE SETTING
Some features can be adjusted by your service representative to suit your
needs. This section gives a brief description of these features. For more
information, contact your service representative.
Energy saver
With this function, all input modes are reset and the copier uses less
electricity. If you select this function, the copier can automatically turn the
energy saver function on. Your service representative can set one of six
ratios. Note that the greater the saving ratio is, the more time the copier will
need to return to the ready condition.
APS A5 detection
Your service representative can set the copier to detect the original size that
is set on the exposure glass as A5 lengthwise whenever the copier cannot
detect it with Auto Paper Select.
APS size priority (8 " x 13")
1/2
As a default setting, when you use 8 " x 13" originals, the copier selects
1/2
the same size paper in Auto Paper Select mode. Your service repre-
sentative can change the paper size to 8" x 13" or 8 " x 13".
1/4
Special paper size set
If you would like to use following paper sizes in the 1st tray, contact your
service representative.
297 x 432 mm lengthwise, B6 sideways, 8 " x 14" lengthwise, 5 " x 8 "
1/2 1/2 1/2
sideways, 11" x 15" lengthwise, 10" x 14" lengthwise, 8" x 10 " lengthwise,
1/2
8" x 10" lengthwise, 267 x 390 mm lengthwise, 195 x 267 mm lengthwise,
195 x 267 mm sideways, 8" x 13" lengthwise, 8 " x 13" lengthwise
1/4
A3 double count
When you use A3 paper with user codes, your service representative can
set the copier to count each A3 sheet as two copies.
139