Carrera CRR RACE-210 Instruction Manual page 40

Trimming Long Hair
Use the long hair trimmer on the rear of the shaver to shorten
beard and sideburns.
1. take off the protective cap.
2. Push the long hair trimmer upward.
3. Use the on / off switch
4. After use, switch off the shaver, push the long hair trimmer
into its basic position and clean the shaver (→ 06. Cleaning
and Care).
Three-day stubble shave
1. You can use the 3-day stubble attachment (2) to trim your
beard to a hair length of 3 mm.
2. Place the beard attachment onto the shaving head so that
it is firmly attached to it.
3. trim your beard as you would normally do when shaving.
NOTEs:
Observe that the 3-day stubble attachment is intended only
to limit the beard hair growth to a length of 3 mm, and that it
is not designed to trim longer hair to 3 mm.
When using the 3-day stubble attachment, the direct contact
of the shaving foil to the skin is lost. Consequently, the shav-
ing system is no longer naturally "greased" by sebum.
4. to ensure constant shaving performance, apply a drop of
blade or sewing machine oil after wet cleaning. See sec-
tion "Cleaning with Water".
40
;
(7) to switch on the shaver.