Operation - Carrera CRR RACE-210 Instruction Manual

7. Unplug the power cable from the power point and from
the shaver as soon as the batteries are fully recharged.
8. this shaver features a quick-charge function.
It takes 5 minutes and will last for a single shave.
9. If your shaver stops during shaving due to its battery
being insufficiently charged, you can continue shaving
by connecting it to a power point.

05. OPERATION

wARNING! Risk of injury
Do not operate the shaver if the shaving foil
is damaged.
Independent of the charging state of the batteries, you are
always able to use the shaver connected to the mains power.
1. In order to use the shaver connected to the mains power,
ensure that the shaver is switched off.
2. Connect the wall power supply to the shaver.
3. Insert the wall power supply into an easily accessible
power point.
4. take off the protective cap.
5. Use the on / off switch
using the Travel Lock
this function prevents the shaver from being accidentally
switched on during transport. In order to activate/deactivate,
press the small button in the center of the On/Off switch
then, push the switch to ON, up in the direction of the blade
head.
38
;
(7) to switch on the shaver.
;
(7).