Download Print this page

I-Sotec i-soamp 4D Manual page 10

Advertisement

D
B Bedienungsanleitung i-soamp 4D
B.1 Erste Inbetriebnahme
1.
Schalten Sie das Radio mit kleiner Lautstärke ein.
2.
Nach der Funktionskontrolle der einzelnen Lautsprecher stellen
Sie eine etwas höhere Lautstärke am Radio ein. Justieren Sie
jetzt gegebenenfalls mittels der Level-Einsteller der Endstufe die
Grundlautstärke der Lautsprecher ein. Das Lautstärkeverhältnis
von Front- und Rear-Lautsprechern, sowie dem Subwoofer
lassen sich nun mit den entsprechenden Levelreglern (5 und 6)
einstellen. Die Trennfrequenzen werden dementsprechend über
die Frequenzregler (7 und 8) eingestellt.
B.2 Bedienelemente und Anschlüsse
1.
Betriebsanzeige (Radio ON) GRÜN
2.
Unterspannungsanzeige (Low Batt.) GELB
3.
Übertemperaturanzeige (Temp.) ROT
4.
Wahlschalter für Betriebsart
5.
Lautstärkeregler Front
6.
Lautstärkeregler Rear/Subwoofer
7.
Einstellung Frequenzweiche Front
8.
Einstellung Frequenzweiche Rear
9.
Remote Eingang. Die Benutzung ist optional.
10.
Sicherung (20A)
11.
Systemstecker (Strom, Lautsprecher Ein- und Ausgänge)
B User's Guide i-soamp 4D
B.1. Operating the equipment for the first time
1.
Turn on the radio with the volume set at low.
2.
After checking the operation of the individual loudspeakers, set
the volume of the radio a little higher. If appropriate, use the
level adjuster of the power amplifier to adjust basic volume of
the loudspeakers. The volume ratio of the front and rear
loudspeakers as well as the subwoofer can now be adjusted
with the corresponding level adjusters (5 and 6). The cut-off
frequencies of the speakers can be adjusted with the
corresponding frequency adjusters (7 and 8).
B.2 Operating elements and connections
1.
Power-Indicator (Radio ON) GREEN
2.
Undervoltage-Indicator (Low Batt.) YELLOW
3.
Excess-Temperature-Indicator (temp.) RED
4.
Selector-Switch for Operating Mode
5.
Level-Control-Front
6.
Level-Control-Rear/Subwoofer
7.
Frequency-Control-Front
8.
Frequency-Control-Rear/Subwoofer
9.
Remote-Input (Optional)
10.
Fuse (20A)
11.
System-Plug for Power, Loudspeaker Lnput and Output
UK

Advertisement

loading