Troubleshooting by LED and Buzzer Indicators
Diagnosis
Normally, when the printer is in not working properly, the "Power"
LED blinks continuously, and printing and communication
between the host and printer stops. Refer to LED indications
listed below to understand possible solutions to resolve the
problems printer may run into.
LED Indicators: Power and Ready LEDs blink at the same tempo
Power LED
Ready LED
ON
ON
OFF
OFF
Possible Problems
Media sensor cannot
index label gaps
Media out
Paper jam
OS-2130D & OS-2130DE User's Manual
Solutions
Check the label path
Check the label sensor
Install a new label roll
Recover the jam
29
Remarks
If a continuous label roll
is in use, set
"continuous media"
printing in driver
settings or commands.