Qsi Standard Controls - Quincy QSI-90 Instruction Manual

Section IV - Operating Procedures

QSI Standard Controls

Main Display Screen:
18
This is the main display screen, that
shows the basic parameters and current
conditions.
Pressure, Temperature, operating status are
all available at a glance.
The main control buttons are present for
Starting and Stopping the compressor.
Menu buttons, on the left, give access to
the various utility menus.
If there is an alarm condition, it will be
shown in RED on the left-hand side of the
screen. Non-fatal messages, such as fi lters
will be shown in BLACK.
Use the ALARMS button to access the
alarms page to clear the fault.
Use the TIMES button for fi lter messages.
The display can show METRIC values.