Advertisement
DRAIN (OTHER FINISHES)
S Remove the flange from the body.
S Thread the nut completely onto the body.
S Apply a 1/2" diameter ring of plumbers putty or
other sealant to the underside of the drain flange
according to the putty manufacturer's
instructions.
S Insert the drain body up into the underside of the
lavatory drain hole.
S Position the body so the seal hole is facing
toward the back of the lavatory.
S Thread the flange onto the drain body from the
topside of the lavatory.
S Securely handtighten the nut from the underside
of the lavatory.
S Remove any excess putty or sealant.
S Assemble the nylon washer, metal washer, and
nut onto the long end of the rod.
S Assemble the nylon washer and rubber washer
onto the short end of the rod.
ALL DRAINS
S Insert the stopper into the flange.
S Remove the body nut from the seal hole.
S Fit the short end of the rod into the body seal
hole and under the stopper for regular
installations; through the hole for
vandal-resistant installations.
S Loosely secure in place with the body nut.
S Remove and adjust the stopper so the stopper
lifts about 3/8" when opened. To adjust, loosen
the stopper nut and shorten or lengthen the
stopper as needed. Re-tighten the stopper nut.
S Handtighten the body nut.
S Apply thread sealant to the tailpiece. Thread the
tailpiece into the body and securely handtighten.
Kohler Co., Kohler WI
Flange
Apply Plumbers
Putty
Seal
Hole
Body
Nut
Metal Washer
Nylon Washer
Nut
Nylon Washer
Rubber Washer
Body
Nut
Rod
Seal Hole
Apply Thread
Sealant
3
Lavatory
Underside
Rod
Stopper
Stopper
Nut
Body
Tailpiece
BA
116585-2-
(-)
Advertisement
