GE Arize Element Series Installation Manual page 3

Sample Base Installation Diagram
AC line
Always wear safety gloves while handling light modules.
Installation
Hanging the Light Module
A
1
Install the support cables
A) At first end of light module, wrap non carabiner
end of support cable around structural member.
B) Pass carabiner through support cable loop to
create a noose.
Repeat with second support cable at other end of
light module.
NOTE: Ensure greenhouse structures and members are rated for loads created by light modules and drivers.
Suitable min. 2 mm diameter suspension cable required to complete installation.
Structural member
Structure
DRIVER
Top Light Module
Plants
CAUTION / ATTENTION
Structural member
B
DRIVER
Support
Cable
Plants
Portez toujours des gants de protection lorsque vous manip-
ulez les luminaires.
A
2
Install the light module
A) Attach first carabiner to the 1/4'' round hole
on one side of the light module. Repeat on
other side of light module.
B) Ensure both carabiners are through the hole
and both gates are closed.
3
Unistrut
DRIVER
B