Table of Contents
Advertisement
Image quality
Alarm
Output
Control functions
VideoJet 1000
With established connections, the video image is displayed in the
middle of the browser window. Depending upon configuration, other
information may also appear in the display (see page 84).
The VideoJet 1000 provides either a live image (MPEG format) or
single video frames in JPEG format.
Click on the navigation bar at the top of the screen on one of the
links MPEG-2, MPEG-4 or M-JPEG, in order to display or decode
the video sequences in the corresponding image format.
Above the video image, click on one of the links 352X288 or
704X576, to display the image in the selected resolution.
In the event of an alarm, the alarm symbol is displayed in red along
with the video image. The display of alarms and other details is
dependent upon the configuration of the unit (see page 78).
Depending upon configuration, equipment can be switched by the
relay of the VideoJet 1000 (e.g. a floodlight or door opener).
To activate the relay output, click on the relay symbol beside the
video image. The symbol will be displayed in red when the relay is
activated.
Possibilities for the control of peripheral equipment (e.g. pan and tilt
heads) is dependent upon the installed equipment type and on the
configuration of the VideoJet 1000.
Operation
85
Advertisement
Table of Contents
