VCS VideoJet 1000 Manual page 72

Configuration with web browser
Interface COM 2
74
Parity check:
Select the type of parity check.
Interface mode:
Select the desired protocol for the serial port.
Half-duplex mode:
Select here to suit the individual application.
The parameters for the serial interface port COM2: RS232 can be
configured to suit individual requirements.
Serial port function:
Select the function for serial port 2. Select Terminal if the unit is to
be operated from a terminal. If the port is required to transmit trans-
parent data, select the entry Transparent.
Baud rate:
Select the value for the Transmission rate in bits/s.
Data bits:
Select the number of data bits per character.
VideoJet 1000