Table of Contents
Advertisement
Configuration with web browser
Serial port COM 1
44
Tracker
In the Tracker field you see an arrow, which indicates the current
motion in the video image. By means of check boxes in the four cor-
ners, the desired direction can be activated. If, for example, all
movements to the "left" and "upwards" are to activate an alarm, then
mark the top left corner. If all movement to the "left" is to activate the
alarm, then check the left upper and the lower left corners.
Note the movements indicated by the arrow in the video image over
a long period and at all light levels likely to be encountered in prac-
tice.
Click the check box in order to activate the corresponding direc-
tional component.
The parameters for the serial interface port COM1: RS232/485 can
be configured to suit individual requirements.
VideoJet 1000
Advertisement
Table of Contents
