Table of Contents
Advertisement
Configuration with web browser
Click on the button Motion detection, to open the page for the con-
figuration of the video sensor.
If required, click on the button Defaults, to reset all values on this
page to standard values.
When configuration of the video sensor is complete, click on the link
Overview on the navigation bar to return to the graphical overview.
K
Motion detector
Select here the option On to activate the video sensor.
Select sensor field
The areas of the image to be monitored by the video sensor are
selected here. The video frame is subdivided into 396 quadratic
cells. Each of these cells can be activated or deactivated. If it is
necessary to exclude particular regions of the camera field of view
from the monitoring process because of, say, continuous move-
ment (e.g. due tree movement in a wind), the relevant cells can be
deactivated.
41
VideoJet 1000
Advertisement
Table of Contents
