Page 2
VOLT Salty Dog Brass MR16 In-Grade Light ® A. (1) Fixture B. (1) Stake VWL-703-BBZ Important: Please Read Before Installation Parts Required (sold separately) This fixture is intended for installation in accordance with local codes A. (1) MR16 Lamp and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
INSTALLATION INSTRUCTIONS Install Lens and Faceplate VOLT Salty Dog Brass MR16 In-Grade Light ® VWL-703-BBZ Place the lens, gasket and faceplate Screw back onto the housing. Secure them Remove Faceplate and Lens with screws previously removed. Faceplate Hand tighten until snug, then use a...
Page 4
INSTALLATION INSTRUCTIONS VOLT Salty Dog Brass MR16 In-Grade Light ® VWL-703-BBZ Wire Connections Pigtail Wire Connectors Main Supply Cable Strip both leads from the luminaire pigtail. Using two wire connectors (sold separately), connect leads from luminaire to the main supply cable.
Need help?
Do you have a question about the VWL-703-BBZ and is the answer not in the manual?
Questions and answers