7 7 7 7 7
Dissassembly Procedures
Dissassembly Procedures
Disassembly procedures for indoor unit
Operating Procedures / Photos
1.Disassemble the front panel
Open the front panel, slightly press the axial of both sides,
then to make the axial slide, can take down the front panel.
Push the filter onwards, can take down the front panel.
Push the filter, can take down the filter.
Unscrew one screw from top cover, can take it down.
2.Disassemble the air guide board
Use the screwdriver to pushthe axial,
hold both side of air guide board. Then can
take them down.
3.Disassemble the front case
Open the screw cover, screw off 5pcs screw
fix on the front case, loosen the rear clasp,
lift it up, can take down it.
Front panel
Front
Filter
Bearing sleeve
Air guide board
Screw
Clasp
Top cover
Need help?
Do you have a question about the Cozy Series and is the answer not in the manual?