Meridian SEED EXPRESS Series Operator's Manual page 37

2. Remove the lock pin from the damper
mechanism. The conveyor may need to be
lowered slightly to remove the tension from the
lock pin. Store the pin in a safe location.
3. Turn the key switch to the ON position.
4. Move the fuel valve lever to the ON position
(towardthefrontofthemachine).
5. To start a cold engine, move the choke lever to
theCLOSEDposition(towardthebackofthe
machine).Also,movethethrottlelever1/3the
distance of the full open position.
6. Start the engine and move the throttle lever to
run the engine at full speed.
7. Rotate the conveyor to the desired location.
8. Start the conveyor from the seed tender
control panel or use the wireless remote
control.
37