9. Open the slide gate from the seed tender
control panel or use the wireless remote
controltothedesiredseedflow.
IMPORTANT
Close the slide gate and stop the conveyor prior
to the planter's seed box being completely full. If
the seed box requires additional seed, start the
conveyor without opening the slide gate; this will
use the seed that is already on the conveyor. This
methodwillalsohelppreventoverfillingofthe
seed box or the seed tender's pan.
38
10. Whentheplanterisfilled,closetheslidegate
and then stop the conveyor belt.
11. Whenfinishedloadingtheplanter,returnthe
conveyor to the transport position and install
the lock pin and retaining clip.
Note: If the seed tender is being moved within
afieldlocation,itisnotnecessarytoinstallthe
damper mechanism to the conveyor.