Peg Port Configuration; Pch-Io Configuration - DFI CS631-C246/Q370 User Manual

Chipset
X

PEG Port Configuration

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
PEG Port Configuration
PCIE1 Not Present
Enable Root Port [Enabled]
Max Link Speed [Auto]
PCIE3 Not Present
Enable Root Port [Enabled]
Max Link Speed [Auto]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Enable Root Port
Enable or disable the root port.
Max Link Speed
Configure PCIE1/PCIE2 port's Max Speed: Auto, Gen1, Gen2 or Gen3.
User's Manual | CS631
Chipset
X

PCH-IO Configuration

Enable or Disable the Root
PCH-IO Configuration
Port
► PCI Express Configuration
► SATA And RST Configuration
► HD Audio Configuration
LAN1(I219)
Wake on LAN Enable
State After G3
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
LAN1(I219)
Enable or disable onboard NIC.
Wake on LAN Enable
Enable or disable integrated LAN to wake the system.
State After G3
This field is to specify what state the system should be in when power is re-applied after a
power failure.
S0 State
S5 State
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
[Enabled]
[Enabled]
[S0 State]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
The system automatically powers on after power failure.
The system enter soft-off state after power failure. Power-on signal input is
required to power up the system.
Note:
The sub-menus are detailed in following sections.
Chapter 3
BIOS SETTINGS
PCI Express Configuration
settings
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
41